下边4张照片,都是用K10D拍摄,闪光灯白平衡,光圈优先(9.5),直出JPG+剪裁+缩小. (点击放大), 比较了戴帽子,不戴帽子,无线以及天花板反射(天花板白色稍有些偏黄),这四种效果. 帽子是Pocket Bouncer, 链接在这里 LumiQuest® Photographic Accessories | Pocket Bouncer
1. 内闪+无线戴帽子的外闪:
2. 戴帽子的外闪:
3. 不戴帽子的外闪直照:
4. 不戴帽子的外闪天花板反射:
好了,以上 四种,大家可以自己对比下.
个人看法:
天花板反射的光线在上边4个里算最好的~不过白平衡就有点不对了.戴帽子的外闪玩无线应该也是不错,不过我没什么经验,所以实际效果一般. 戴帽子的外闪装机器上效果也不错,光线跟不戴帽子比柔和的多, 也比较均匀,影子控制的也不错~至于直射,以后估计没机会用了 嘿嘿.
PS:本帖仅为讨论闪光灯效果…..照相技术不考虑…
K10D Pentax Photographydp论坛看来的，How to get back to 1.10 firmware… NEW
波兰的一位网友MOD出了带有v1.11文件头的v1.10 fw。如果之前升级到了v1.11现在又想降回v1.10的可以用这个fw再刷一下。
http://stefanski.one.pl/~alkos/varia/1.10_with_1.11_header.zip
刷完这个mod版的v1.10后，为了安全起见，还是再用原版的v1.10再刷新下比较妥当。
K10D Pentax Photographyhttp://www.pentax.co.jp/japan/support/download/digital/k10d_s.html
日本pentax官网刚刚放出了k10d的v1.11 fw.
官方的说明主要有两点变化，
1: 修正内置闪光灯使用的时候后帘同步控制。
2: 机内Raw处理输出可以处理多重曝光拍的文件了(WB使用拍摄时的设定)。
其实还有最重要的一个变化。不能用V1.10的方法进工程模式了。 （工程模式见此）
所以如果不是非得升级的朋友，或者相机有跑焦问题的朋友请不要着急升级。
K10D Pentax Photography
从左到右分别是：
具体介绍暂时就先不写了，基本上上边都有连接，大家有兴趣可以先看看，其他待俺慢慢补上。
Computer K10D Pentax Photography yy之前的这贴 K10D还没入手呢就开始琢磨起相机包了最终选择了black/tan的颜色，并于昨天入手~
入手后，发现比 想象中的小了点。
不过装K10D的话还是没问题，而且内部设计也不错，可以随意搭配。
做工还是相当的精致，小细节处理的也很好。
再来个K10， Hadley Pro 和之前买的National Geographic Earth Explorer 国家地理 2343合影一张，随便看看到底多大~
更多图片请到我的gallery观看。谢谢
K10D Photography本来春节这几天北京一直晴天，结果好不容易初3有空去了故宫，整个天都灰蒙蒙的，也不知道是雾还是灰……总之北京污染太严重啦:( 凑合用K10D拍了些，就算练手啦~
更多图片请去我的gallery观看~ 也希望大家能多提提建议帮助我进步哈~
K10D Photographyself focus adjust for dl,ds,ds2,k100d.: Pentax SLR Talk Forum: Digital Photography Review
Pentax Photographyhi,
Here’s come How-to-adjust dl, ds, ds2, k100d!!
I can’t find exact source of this, because it is wide spreaded.
If your pentax camera scribed above have problem with focus, you can adjust it yourself.
And Of course, You yourself is responsible for doing something scribed below.
STEP
1. Power OFF
While pressing [AE-L]+[INFO], turn the camera on.
Firmware is desplayed on LCD.
Press [MENU]->[MENU]->[INFO] within 5 seconds.
You can see DEBUG mode screen.
By pressing [Right key],Make [DEBUG MODE DIS] to [DEBUG MODE EN].
Then, Press [OK].2. Press [MENU], you can see setup menu.
By pressing [Up key], select AF TEST.
By pressing [Right key], go into AF TEST menu.
By pressing [Down key], select FOCUS CORR.
now you can adjust shift amount by pressing [right key] or [left key].
(*Don’t touch AF Area Test.)
after changing the value, Press [OK] to save.
3. Test your camera that Focus is corrected.
(repeat step 2. till you satisfy the result.)
4. Power OFF
While pressing [AE-L]+[INFO], turn the camera on.
Firmware is desplayed on LCD.
Press [MENU]->[MENU]->[INFO] within 5 seconds.
You can see DEBUG mode screen.
By pressing [Right key],Make [DEBUG MODE EN] to [DEBUG MODE DIS].
Then, Press [OK].
5. Go out and enjoy!!Again, You YOURSELF is responsible for doing this process.
俺的K10D自己测试了下没有跑焦问题,但是如果您的K10D有这个问题的话,可以尝试下下边的方法,自己搞定~
self focus adjust: Pentax SLR Talk Forum: Digital Photography Review
Hi,
I have big news!
If your K10D have problem with focus, you can adjust it yourself.
Someone in Korea figured it out himself.
He is not a employee of Pentax or related company.
He just found out by trial-and-error with key-set.
Of course, You yourself is responsible for doing something scribed below.
Here’s How-to-adjust-focus.
1. Your K10D’ firmware version must be 1.10.
2. Test shot for focus trouble.
3. Turn the camera OFF.
While pressing [PLAY]+[OK], Turn the camera ON.
You can see firmware version on LCD screen.4. Firmware version is appeared,
then press [Fn]->[Fn]->[INFO]->[MENU] within 5 seconds.
You get service menu!!!5. by pressing [right key]
,Make DEBUG MODE to DEBUG MODE .
then press [OK].
(save and LCD will be black out)6. Press [MENU] and go to SETUP tab.
then, Press [Up key], you can see TEST MODE.7. Select AF TEST menu. now you have AF correction menu.
If you have Front-focusing, reduce the value.
If you have back-focusing, increase the value.
after adjust some value, press [OK] and quit out of setup menu.8. TEST for focus, find out that focus is correct.
(repeat this from 6 for correct focus.)
9. Go to service menu(step 3,4).
Make DEBUG MODE to DEBUG MODE .
then press [OK].(save and LCD black out)10. Go out and enjoy nice photos!!!
AGAIN, You yourself is responsible for any damage or trouble by doing this process!!!!!!!!!!!!!
简单翻译:
K10D Pentax Photography哈，我有一个大好消息！
如果你的K10D有跑焦问题，你可以自己调整
一个韩国人自己找出这个方法，他不是P的雇员
他是反复试出来的
当然，如果机器因此坏了，你得自己负责啦以下是调整方法：
1。K10D 固件版本必须是1.10
2。测试出你有跑焦
3。关掉相机，然后按住[PLAY]+[OK],开机， 然后你就会看见LCD上显示了固件版本号
4。然后在5秒内按[Fn]->[Fn]->[INFO]->[MENU]， 你就进入服务菜单
5。按向右键， 在DEBUG MODE选项中选“DEBUG MODE，然后按OK键, 机器就会保存LCD就黑了
6。按“MENU”键，然后按向上键，你就可以看到 TEST MODE
7。选AF TEST 菜单，进入对焦调整菜单啦。你会看到一个值
如果你焦点往前跑，减少这个值；如果往后跑，增加这个值。修改值后，按OK键然后退出菜单
8。测试焦点，看准了没有，如果没有准，重复6，7步以得到合适的值
9。重复3，4步，进入调试菜单， 在DEBUG MODE选项中选“DEBUG MODE”，然后按OK键，你的值就保存下来了
10。现在你可以好好拍照了再次声明，因此弄坏了相机是你自己的问题。
1。K10D 固件版本必须是1.10
2。测试出你有跑焦
3。关掉相机，然后按住[PLAY]+[OK],开机， 然后你就会看见LCD上显示了固件版本号
4。然后在5秒内按[Fn]->[Fn]->[INFO]->[MENU]， 你就进入服务菜单
5。在DEBUG MODE选项中，按向右键，选“EN”，然后按OK键, 机器就会保存,LCD就黑了
6。按“MENU”键，进入“C设定”，然后按向上键，你就可以看到 TEST MODE
7。选AF TEST 菜单，进入对焦调整菜单啦，按向下键。
你会看到一个值,如果焦点往向你方向跑近，减少这个值；如果焦点离你往后跑远，增加这个值。修改值后，按OK键然后退出菜单。
8。测试焦点，看准了没有，如果没有准，重复6，7步以得到合适的值
9。重复3，4步，进入调试菜单， 在DEBUG MODE选项中选“DIS”，然后按OK键，你的值就保存下来了
10。现在你可以好好拍照了
Re: Phil’s Pentax K10D Review: Pentax SLR Talk Forum: Digital Photography Review
K10D Pentax PhotographyI was made aware of one of the members desire to try out my processing technique. Well here it is in greater detail if you wish to try it out.When you have imported your RAW image in to photoshop or a unsharpened neutral JPEG, you accentuate the image i.e.unsharp mask at 0.3 pixels at 240 to 330 percent. After doing so you unsharp mask at 40 to 60 pixel at 10 to 15 percent. Once you have done that, you go to layers and click on duplicate layer. Here is where you have two very important choices. This will affect the look of the image. One will accentuate and highlight the blacks and the other will accentuate the colors and the shadows. For the later you will de-saturate the layer. Go to the layers menu and you will see an icon labeled “Normal”. Click on that icon and you will open a file with several lighting options. Choose soft light. This in my opinion will have too much contrast. You have an opacity and fill bar. I generally reduce the fill and opacity any where from 50 to 80 percent. Once you have done that and if pleased by the result, flatted the image in the Layers Menu and “Voila” a medium format film look in digital. Second option is DO NOT de-saturate the image. Keep it in color and do exactly what was done in the previous method. You will have a highly saturated and profound looking image.
Benjamin Kanarek
Paris, France
The owner is 
wwwys
